Browse all practice questions for the Alcatel Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Alcatel Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What best defines the latency budget in an optical network?
  • What is the primary purpose of VRF in routing?
  • Which device serves as the default gateway for the router?
  • Which devices propagate collisions?
  • If a switch is running from the certified directory, can changes be saved?
  • What command saves changes to the working directory?
  • Who certifies the files in the certified directory?
  • Which statement about the running configuration source is correct?
  • What is the Hello protocol used for in OSPF?
  • Which statement accurately describes the power delivery of PoE (802.3af) and PoE+ (802.3at) per port?
  • When monitoring CPU utilization on a switch, what is the recommended criterion?
  • Which statement is true about IPv6 compared to IPv4 regarding header size and fragmentation behavior?
  • Which OSI layer is responsible for IP routing?
  • Which of the following is a common security best practice for network devices?
  • What do attenuation and dispersion refer to in fiber optics, and how do they affect signal?
  • In IKE, what is negotiated during Phase 2?
  • Which statement about BPDU is true?
  • What does the term 'Access Methods' refer to in networking?
  • Which versions of STP are supported by the Alcatel 9700?
  • Which statement best describes the purpose of having separate certified and working directories?
  • VRRP provides redundancy for which network component?
  • What is a broadcast domain?
  • POST can be viewed by which method on the OS9700 switch?
  • Which type of link is used to carry traffic for multiple VLANs between switches?
  • In DHCP, what defines the address range from which IPs can be assigned?
  • Which statement describes how Router Advertisements support IPv6 address configuration?
  • What is IPsec ESP vs AH, and when is each used?
  • Which statement describes the effect of a switch on collision domains?
  • GMPLS provides broader control over transport networks by supporting multiple switching granularities. Which of the following describes this capability?
  • Which protocol does the WhatsUp Gold server use to monitor Alcatel switches?
  • Which statement about CMM roles in a chassis is true?
  • Which statement about Area 0 in OSPF is true?
  • Which IPsec protocol provides encryption for IP payloads?
  • Which statement best describes ARP table security verification?
  • How many NI modules do Alcatel switches generally have, and what performance standards support?
  • In SNMP, what is an OID?
  • What is the main function of the Optical Line Terminal (OLT) in a PON?
  • What should be checked regarding Denial of Service (DOS) attack statistics?
  • Which statement about the STP family is true?
  • Which statement best describes the OSPF validation step?
  • What does session inactivity ensure?
  • What information does traceroute provide that helps in troubleshooting?
  • Boot.cfg is described as which type of file?
  • What does Backbone 2 forward?
  • What must be done before committing changes to the certified directory?
  • What file extension identifies switch image files?
  • What is Link Aggregation?
  • Q Tagging is also known as?
  • Which description best captures the concept of an agent in this material?
  • Which of the following is NOT listed as a STP port state in the material?
  • In a Passive Optical Network, which multiplexing technique is used for the upstream channel?
  • What is MPLS Traffic Engineering (TE) and what is an LSP?
  • In SNMP, what is the central system that collects data from managed devices commonly called?
  • How can a System Administrator access the switch?
  • What is the running directory in switch operations?
  • If the certified and working directories are not the same, what does the CMM do with the running configuration?
  • All Switch-to-Switch connections are which type of links?
  • Which statement correctly describes a managed device in relation to SNMP?
  • What is the purpose of the WhatsUp Gold (WUG) server in Alcatel switches?
  • How many port states are listed for STP in the material?
  • An agent in network management is described as which of the following?
  • Describe the TCP three-way handshake and its purpose.
  • The switch can be rebooted from the working directory by using the ______ command.
  • Which of the following is a correct summary of Navy switch indicators?
  • In OSPF, which data store is used to represent network topology for routing decisions?
  • What does DWDM stand for in optical networks?
  • What does a BPDU do in a network?
  • What should be monitored regarding the software version and uptime on a switch?
  • An agent is described as software running on a managed device that communicates information via SNMP.
  • Which DNS record type maps an IPv6 address?
  • Which statement best describes the DOS monitoring guidance?
  • Q-in-Q tagging is used to carry what across a provider network?
  • In a Passive Optical Network (PON), which component is located at the service provider's facility?
  • Which statement correctly contrasts symmetric and asymmetric cryptography?
  • In BGP, what do LOCAL_PREF and MED influence?
  • What is Forward Error Correction (FEC) used for in optical networks?
  • What is the purpose of the POST for the OS9700?
  • If the certified and working directories are identical, what does the CMM allow?
  • Which device port is used to view POST for the OS9700?
  • What is the purpose of Link Aggregation (LACP) in a network?
  • Which component resides on a managed network and contains an SNMP agent?
  • What is the purpose of a loopback interface on a router or switch?
  • What is a core benefit of Network Function Virtualization (NFV)?
  • Describe the interaction between NFV and SDN and why it matters.
  • What must be done after changes are verified on the primary CMM?
  • Which of the following is a primary protocol associated with the Application layer and commonly used for web content?
  • In a multi-tenant network, VRF primarily enables what?
  • What is the purpose of VRRP?
  • Which data structure is maintained on each OSPF router to store link-state information?
  • Boot.cfg is found in which directories?
  • What does OSPF use to maintain an up-to-date routing table?
  • In Software-Defined Networking, how are control plane and data plane separated?
  • In the OSI model, which layer handles dialog control?
  • OSPF belongs to which category of routing protocols?
  • What command is used to save the running configuration to the working directory?
  • What is the Link-State Database (LSDB) in OSPF?
  • In IPsec, what is the role of IKE?
  • Which combination describes standard management access methods for the switch?
  • What does GMPLS extend MPLS to support?
  • What is Q-Tagging?
  • Which option best describes the function of a BPDU in networking?
  • Given two /24 networks, 192.168.10.0/24 and 192.168.11.0/24, what is the summarized route and prefix length?
  • What is the purpose of BGP confederations?
  • Which action best describes how CMM roles are assigned in a chassis?
  • Which OSI layers do switches and routers primarily operate in?
  • Which statement describes fragmentation behavior in IPv6?
  • Which statement accurately describes an agent in the material?
  • Which statement describes a managed device?
  • Where should the running configuration on the switch be sourced from to ensure integrity?
  • Which devices break up collision domains?
  • What is the purpose of software rollback in switch operations?
  • In STP, the Root Bridge is identified by which criterion?
  • In IPv6, explain stateless address autoconfiguration (SLAAC) versus stateful DHCPv6.
  • For VRRP, which statement best describes how it should be handled?
  • Which statement best describes devices that can perform both Layer 2 and Layer 3 functions?
  • Which command displays the list of user accounts on an Alcatel switch?
  • What is Open Shortest Path First (OSPF)?
  • Where do SNMP agents reside in a typical network?
  • Describe the typical use of LC and SC fiber connectors.
  • Which protocol is used for VLAN route redundancy in Alcatel switches?
  • Which statement best describes UDP relative to TCP?
  • In the context of this material, the agent communicates information via which protocol?
  • What is the role of System Administrator (SA) access?
  • Area 0 serves as what in OSPF?
  • The Command Line Interface (CLI) is available to the SA
  • What command is used to synchronize the secondary CMM to the primary CMM?
  • If the running, working, and certified directories of CMMA and CMMB are the same, what happens on a reload?
  • Which statement best describes Network Interface (NI) modules in Alcatel switches?
  • What is the primary purpose of route reflectors in BGP?
  • How does STP prevent loops in a network?
  • The management of a switch is controlled by three types of files. Which set correctly lists these file types?
  • What does SNMP stand for?
  • What does the Spanning Tree Protocol primarily prevent in a network?
  • In OSPF, all areas must connect to which part of the network design?
  • What happens if changes are made to running RAM and the switch is rebooted?
  • Which WAN optimization techniques are used to reduce bandwidth usage and improve throughput?
  • Which IPv6 component uses ICMPv6 for address resolution, neighbor reachability, and router discovery?
  • In ISNS for Alcatel OS 9700 switches, software failover is implemented by using which components?
  • What role does the CMM play in directory management?
  • What is the main benefit of MPLS labeling?
  • VRRP stands for which protocol?
  • Which of the following is NOT a version of SNMP?
  • In a Navy Switch, which VLAN traffic does Backbone 1 forward?
  • IEEE 802.1Q defines VLAN Tagging.
  • What is DNS and what are common DNS record types A, AAAA, MX, NS, and CNAME?
  • What is the role of the backbone in OSPF?
  • Which statement best describes a common SNMP management component?
  • What is the purpose of the first letter in a VLAN name?
  • Explain ECMP and how it improves network throughput.
  • Which statement best describes an agent in this context?
  • What is the role of a MIB in SNMP?
  • How do you determine the number of usable hosts from CIDR notation?
  • What is the purpose of mapping DSCP values to QoS queues in a network?
  • A reload command is executed. Which statement reflects the resulting action?
  • What does the ARP table verification ensure?
  • What is the significance of the LED indicators on a switch?
  • What is a broadcast storm?
  • Which ICMPv6 messages are used by IPv6 Neighbor Discovery Protocol for address resolution and router discovery?
  • Which components are located at customer premises in a PON?
  • WPA2-Enterprise authentication uses which mechanism?
  • How do SFP and QSFP transceivers differ in terms of data-rate capabilities?
  • LSA stands for which term in OSPF?
  • What unique characteristic does each switch port have in the Navy Switch network?
  • In DHCP, what are scopes, exclusions, and lease times?
  • What is the role of the Root Bridge in STP?
  • Which feature distinguishes SNMPv3 from SNMPv1/v2c?
  • Which algorithm does OSPF use to compute the shortest path?
  • What is the difference between 802.1Q tagging and 802.1QinQ tagging?
  • What is the difference between DNS recursion and DNS iteration?
  • Which method is used to access the CLI over a serial connection?
  • Which of the following items are loaded into RAM as part of the running directory?
  • In SDN architecture, which component centralizes network control?
  • What designates the Primary and Secondary CMM in a chassis?
  • How many Link-State Advertisements (LSAs) are there in OSPF?
  • Which statement best describes a managed device?
  • Explain IPv6 addressing scheme and the role of the default gateway.
  • How do you rollback to the certified configuration?
  • Which of the following is NOT a key component of an SNMP-managed network?
  • Before committing changes to the certified directory, where must the changes be tested?
  • What does the certified directory contain?
  • Which statement correctly describes 802.1Q tagging in VLANs?
  • What is a collision domain?
  • What is VRRP and how does it provide gateway redundancy?
  • Why is a network baseline important for troubleshooting?
  • Which technique allows many internal hosts to share a single public IP by multiplexing connections using port numbers?
  • Which statement about BPDU is true?
  • Which practice reduces the attack surface on network devices?
  • What management tool provides web-based monitoring and management?
  • What is the purpose of the directory structure in CMM software?
  • What is the default gateway for the router?
  • What is the function of the Sync Command in CMM Redundancy?
  • In this network, what device serves as the default gateway for workstations?
  • Which statement is true about collision domains on a switched network?
  • In cloud networking, what is the purpose of virtual networks and security boundaries?
  • Which phase of IKE is responsible for establishing a secure channel between peers?
  • Which of the following is true about an SNMP agent?
  • What is MSTP used to achieve in VLAN deployments?
  • Which statement best describes a VLAN according to the material?
  • In an ISNS LAN, which connections are considered Access Links?
  • Which statement describes the correct approach to verifying OSPF neighbors?
  • What action ensures that a switch can revert to a known good software version if the current image becomes unstable?
  • How many power supplies minimum are required to power a fully populated Alcatel 9700 for basic switch operations?
  • Which access option is considered remote management in typical networking practices?
  • What is the primary purpose of IPv4 exhaustion and how does IPv6 address it?
  • What indicators do Navy switches include?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy